13549213581 肖生

 

耐化学性良好, 涂敷应用, 铸造薄膜, 复合, 涂层

Torlon® 4000T

聚酰胺-酰亚胺

Solvay Specialty Polymers

Technical Data

 

产品说明

 

Torlon® 4000T is a neat resin polyamide-imide (PAI) coarse powder designed for compounding with other polymers and specialty additives. It is the base resin utilized in all Torlon injection molded compounds. Its powder form enables designers to enhance custom compounds and specialty applications with the well-known properties of Torlon polyamide-imide, from its unstoppable performance under extreme conditions to excellent resistance against wear, creep and chemicals.

 

A fine-particle powder version, Torlon® 4000TF, is also available, which is particularly well suited for compression molded parts. A water soluable analog of Torlon® 4000T is available as Torlon® AI-50.

 

Torlon® 4000T has been shown to be useful in blends with polyphenylsulfone (PPSU), polyethersulfone (PES), polysulfone (PSU), polyetheretherketone (PEEK), high-temperature sulfone resins, self-reinforced polyphenylene, polybenzimidizole (PBI), polyimide (PI), polyetherimide (PEI), and polyphenylene sulfide (PPS). Besides blending with other polymers to enhance properties, Torlon® 4000T powder may be compounded with a wide variety of performance fillers, reinforcements, specialty additives and colorants to meet the desired need. The resultant compound may then be injection molded or extruded into film, shapes or fiber.

 

In addition to molded components, Torlon® PAI powders are suitable for use in other high performance forms. For example, these powders are soluble in dipolar aprotic solvents such as N-methyl pyrrolidone (NMP), dimethylacetamide (DMAC), dimethylsulfoxide (DMSO) and dimethylformamide (DMF). Solutions of these systems can be sprayed into coatings, cast into films, spun into fibers and cast or spun into specialty membranes. High strength, high temperature capable adhesives can be also formulated from Torlon® PAI powders. Torlon® PAI powders may be incorporated into epoxy and other thermoset systems to provide additional strength, ductility and heat resistance.

 

Torlon® 4000T powders are available in 3 viscosity grades, which are defined by the inherent viscosity (IV) ranges shown in the accompanying data.

 

• Low viscosity: 4000T-LV

• Medium viscosity: 4000T-MV

• High viscosity: 4000T-HV

总体

材料状态 • 已商用：当前有效

•  Processing - Design Guide (English)

资料 1 •  Processing - Injection (English)

•  Technical Datasheet

搜索 UL 黄卡 •  Solvay Specialty Polymers

•  Torlon®

供货地区 • 北美洲 • 拉丁美洲 • 亚太地区

• 非洲和中东 • 欧洲

性能特点 • 耐化学性良好 • 耐热性，高 • 阻燃性能

用途 • 混合 • 涂敷应用 • 铸造薄膜

RoHS 合规性 • 联系制造商

形式 • 粉状

加工方法 • 复合 • 涂层

 

物理性能 额定值 单位制

固有粘度 3

Torlon 4000T-HV : 25°C 0.70 到 0.90

Torlon 4000T-LV : 25°C 0.50 到 0.59

Torlon 4000T-MV : 25°C 0.60 到 0.69

注射 额定值 单位制

干燥温度 177°C

干燥时间 3.0hr

注射说明

Drying Time/Temp: 4 hrs @ 300°F

Drying Time/Temp: 16 hrs@ 250°F

 

 

 

 

 

 

 

薄膜聚酰胺-酰亚胺,薄膜PAI,PAI Torlon® 4000T是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生