二类医疗三类医疗抗伽马辐射PVDF/PVDF 5000 HG/二类医疗三类医疗抗伽马辐射灭菌PVDF/二类三类医疗抗伽马辐射消毒/抗伽马辐射灭菌/抗伽马辐射消毒

二类医疗三类医疗抗伽马辐射消毒聚偏二氟乙烯，二类医疗三类医疗抗伽马辐射灭菌聚偏二氟乙烯,二类医疗三类医疗抗伽马辐射灭菌PVDF Hylar® 5000 HG东莞市双帮塑胶原料有限公司常年供应一类二类生物兼容三类生物兼容医疗器械用料，二类生物兼容三类生物兼容辐射消毒医疗器械用料,二类生物兼容三类生物兼容环氧乙烷消毒医疗器械用料,二类生物兼容三类生物兼容抗伽马辐射医疗器械用料,随料提供食品药监局注册必需的资料：中英语物性表，COA出厂报告，生物兼容USP Class VI (USP 第 VI 类)报告，MSDS(SDS)报告，ISO 10993生物兼容报告(10993-3 ,ISO 10993-4 , ISO 10993-5,ISO 10993-10, ISO 10993-11, ISO 10993-12)

一类二类生物兼容三类生物兼容医疗级材料包括：PVC PP LDPE HDPE HIPS GPPS ABS MABS PC PC/ABS PC/PBT PC/PET PC/聚酯 COC COP EVA K胶 LCP PA PA11 PA12 Pebax PBT PET POM PCTG PCTA PETG PEBAX PPS PES PEI PSU PPSU PVDF PTFE PMMA POK(PK) PARA PEEK PAEK TPV TPU TPE TPEE TEEE SEBS等一类二类三类医疗器械用料,东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 13549213581 肖生 QQ：15397858 微信：13549213581

三类医疗抗伽马辐射灭菌PVDF, 三类抗伽马辐射消毒PVDF,二类抗伽马辐射灭菌PVDF,二类医疗抗伽马辐射消毒PVDF

二类医疗三类医疗抗伽马辐射灭菌PVDF,二类三类医疗抗伽马辐射消毒, 抗伽马辐射灭菌,抗伽马辐射消毒, USP 第 VI 类

二类医疗三类医疗抗伽马辐射灭菌PVDF,二类三类医疗抗伽马辐射消毒, 抗伽马辐射灭菌,抗伽马辐射消毒

Hylar® 5000 HG

聚偏二氟乙烯

Solvay Specialty Polymers

Technical Data

产品说明

Hylar® 5000 HG is a crystalline high molecular weight powder form of polyvinylidene fluoride (PVDF)specifically designed for solvent-based coatings to provide improved gloss. It forms mechanically strong and tough films that have a broad useful temperature range. These films are highly resistant to most environmental conditions including gamma radiation and are essentially transparent to ultraviolet radiation. The weathering characteristics of Hylar® 5000 HG coatings lead to excellent performance for the long term.

Hylar® 5000 is available only via a licensing program that specifies the composition of Hylar® 5000 HG coatings. A properly formulated finish contains sufficient pigment to make the film totally opaque to ultraviolet radiation at the nominal one mil (0.001 inch) film thickness suggested.

SAFETY

Hylar® 5000 HG is stable at temperatures up to 600°F (316°C). When it is subjected to temperatures above 600°F (316°C) for extended periods of time, hydrogen fluoride (HF) begins to evolve, and at temperatures above 700°F (371°C) HF evolution becomes rapid. Hylar® 5000 HG exhibits excellent flame resistance; however, in case of fire, HF and traces of potentially toxic fluorocarbons can be formed. HF is corrosive, causes burns on contact, and has an American Conference Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV-TWA) of 3 ppm (2.5 mg/m³) (1984).

Thermal decomposition of Hylar® 5000 HG to HF can also occur in a bake oven in the event that temperatures are not controlled properly. In the event of fire, use NIOSH approved self-contained breathing apparatus and skin protection to protect against volatile decomposition products. Hylar® 5000 HG can be disposed of in an approved land fill, but should not be incinerated unless permitted by applicable law and provision is made for absorption of HF.

总览

材料状态 • 已商用：当前有效

资料 1 • Technical Datasheet

搜索 UL 黄卡 • Solvay Specialty Polymers

• Hylar®

供货地区 • 北美洲 • 欧洲

• 纯净/高纯度 • 抗伽马辐射 • 气味低到无

特性 • 高分子量 • 良好的强度

• 高光 • 耐候性，良好 • 韧性良好

• 结晶 • 耐紫外光性能，良好

用途 • 薄膜 • 涂层应用

外观 • 白色

形式 • 粉状

加工方法 • 涂层

物理性能额定值单位制测试方法

密度 / 比重 3 1.75 到 1.77g/cm³ ASTM D792

吸水率 (平衡) 0.040% ASTM D570

纯度 - PVDF > 99.5%

含水量 4 < 0.50%

热性能额定值单位制测试方法

熔融温度 164 到 167°C ASTM D3418

光学性能额定值单位制测试方法

光泽度 - 60° 40.0min ASTM D523

充模分析额定值单位制测试方法

熔体粘度 1750 到 2050Pa•s ASTM D3835

补充信息额定值单位制测试方法

热分解温度 5 382 到 393°C TGA

细度 - 分散 5.50 到 6.00 ASTM D1210